Wall Rangehood, 60cm, Telescopic

INSTALLATION INSTRUCTIONS
8
WARNING!
Failure to install the screws or fixingdevice in accordance with theseinstructions
mayresult in electricalhazards. The manufacturer is not liable for any damage caused
by not following these instructions.
Before installing your rangehood
●
Read the instructions carefully.
●
Unpack the cooker hood and check that all functions are working.
●
Ensure that the voltage (V) and the frequency (Hz) indicated on the serial plate match
the voltage and frequency at the installation site.
●
Protect the hob surface below with cardboard, or the like, to prevent damageoccurring
whilst the cooker hoodis beinginstalled above.
●
Fit the 125 mm ducting adapter to the cooker hood using the screws supplied.
Fig.1 Mounting to underside of cabinetry
FIG. 8
210 mm
35 mm
453/753 mm
Wall
209 mm
Ø125 – 130 mm
Fig.3 Spacer Rear
Screw shall be fixed into
lower face of the hood
Fig.2 Spacer Lateral
FIG. 5
Mounting the rangehood to the underside of cupboard
●
Attach the rangehood to a shelf mounted at the preferred height in your wall units,
bydrilling 4 holes, 7 mm in diameter, (see Fig.1) and fixing with the 4screws supplied.
Note: When installing the rangehood cover the space between the product and the wall
with the adjustable lateral and rear spacer supplied (Fig.2 and Fig.3).
●
Connect 125 mm or 100 mm ducting to the blower outlet and plug in rangehood.