Wall Rangehood, 60cm, Telescopic

12
WARNING!
When replacing the bulb, let the bulb cool, and assure that power to the rangehood has
been turned off. Use new bulbs according to that indicated on the rangehood nameplate.
Carbon filter for all recirculating installations
(Optional: HS60LXW4, HS60XW4, HS90X4)
(With product: HS60LRX4)
Active carbon filters are disposable items designed to remove grease and
odours fromcooking vapours before the air is channelled back into the kitchen.
Theactivecarbon filters must be replaced periodically to work properly, at least every
three months, depending on the frequency with which the rangehood is used.
Note:
●
Fully saturated carbon filters can become a barrier to air movement, impeding the
rangehood’s performance.
●
In the event of fire, fully grease laden filters could be flammable and therefore regular
replacement is recommended.
Replacement
To replace carbon filters (C), proceed as follows:
1 Remove aluminium filter (A).
2 To remove carbon filter undo and remove the screw (B).
3 To install follow above steps in reversed order.
A
B B
C
CB
C
B
Carbon filter replacement
Light bulb replacement
ILCOS D code: DRR-3.5-220/240-GU10-50/50
1 To replace a light bulb, first disconnect the rangehood from its power supply.
2 Apply finger pressure to the face of the light bulb and twist one quarter turn
anti-clockwise — the light bulb will now be free to drop out.
3 Remove the faulty bulb and fit replacement bulb into the lamp holder.
4 Refit the light bulb by applying finger pressure and twist one quarter turn clockwise.
Note: replacement bulbs are not covered by Manufacturer’s Warranty.
CLEANING AND MAINTENANCE