Companion Product Installation Guide
WARMING DRAWER INSTALLATION GUIDE|9
6DISCARD PACKAGING RESPONSIBLY
7MARK AND PRE-DRILL THE HOLES FOR SECURING THE WARMING DRAWER
8CONNECT THE WARMING DRAWER TO THE MAINS SUPPLY
Recycle responsibly
IMPORTANT!
Do not lift the warming drawer by the drawer handle.
IMPORTANT!
●
All electrical work may only be carried out by suitably qualified and competent persons in accordance with national and local safety regulations.
●
This warming drawer must be grounded.
Before placing the warming drawer into the cavity, route the power cord into the back of the cavity and plug it in to the switched socket.
The switched socket should be in an easily accessible area within 35 7/16” (900mm) of the centre rear of the product.
Power requirements
Model code Current Voltage Wattage
WB24SDEB / WB24SDEX 4A 208-240V 832–960W
Unpack the warming drawer and inspect for any signs of damage.
Do not install the warming drawer if it has been damaged.
IMPORTANT!
Packing materials (eg plastic bags, polystyrene foam, staples,
packing straps etc) and tools should not be left around during
and after installation, especially if they are within easy reach
of children, as they may cause serious injuries.