Quick Start Guide

Keep this document handy for easy reference.
●
For detailed information on the features of your oven, see your ‘User guide’.
●
Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.
●
For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service &
warranty’ booklet.
continued >
YOUR MODEL
THE CONTROL PANEL
SETTING THE CLOCK
CONDITION BOTH OVENS
OB30DTEPX3
OB30DDEPX
1 Control panel
2 Oven vent louvres
3 Oven light
4 Telescopic sliding shelf (x5)
5 Side rack
6 Oven door and handle
7 Oven seal
Accessories:
8 Meat probe
9 Rack
!0 Grid
!1 Pan
8
9
!0
!1
2
3
4
5
7
6
1
Locking the control panel
●
To lock, press and hold the
select button until the
control lock indicator comes
on.
●
To unlock, press and hold the
cancel button until the
indicator flashes and then
goes out.
OB30DDEPX3 Top oven
illustrated
Control lock indicator (see
‘Locking the control panel’)
if lit:
Control panel is locked
Timer indicator
(see ‘Using the
timer’)
if lit:
Timer is
counting down
Close door indicator
if lit:
Door is open when oven is on
(some functions only). See
‘Troubleshooting’ in your User guide.
Display
Scroll Select Cancel
You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.
Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock
setting. If you want to set the clock later, follow the steps under ‘To change the time’.
To change the time
(within the user preference menu)
When the oven is first switched on at the wall
1 Press and hold the left and right
scroll
buttons together
for 3 seconds to enter the user
preference menu.
●
The display will either show 12 Hr
or 24 Hr
2 Press the select button to
confirm. The display will flash.
3 Follow steps 2-5 left to set the time.
●
At step 2a, you also now have the
ability to scroll between 24 Hr,
12 Hr and OFF (turns the display off).
●
Refer to the User guide to learn
more about this feature.
3 Press the left and right scroll
buttons to set the time.
1 The display will flash 24 Hr.
4 Press the select
button to
confirm.
2aPress the right scroll
button to
scroll between 24 Hrand 12 Hr
2bPress the select button to
confirm.
UPPER
LOWER
Aero
Bake
True
Aero
Broil Classic
Bake
Aero
Broil
Aero
Pastry
Maxi
Broil
Aero
Bake
True
Aero
Broil Classic
Bake
Aero
Broil
Aero
Pastry
Maxi
Broil
Upper Oven Function
indicators
(see ‘Oven functions’)
Lower Oven Function
indicators
(see ‘Oven functions’)
Function dialUpper Oven
selector button
Lower Oven
selector button
Upper oven
Temperature
indicator
Lower oven
Temperature
indicator
Temperature
dial
Function halo Temperature
halo
Cooking time indicator
(see ‘Automatic cooking’ in User guide)
if lit:
Automatic cooking time is set
Meat probe indicator
(see ‘Using the meat probe’ in User guide)
if lit:
Meat probe is in use
(display will alternate between
probe set temperature and internal
temperature of the meat)
Stop time indicator
(see ‘Automatic cooking’ in User guide)
if lit:
Automatic stop time is set
Upper oven
Lower oven
Upper Oven indicator if lit: Oven is on
Lower Oven indicator if lit: Oven is on
It is important that you condition the oven before using it for cooking and baking. Conditioning will burn off any manufacturing residue
and ensure you get the best results from the start. You can condition both ovens at the same time. Follow the steps below.There will be
a distinctive smell and a small amount of smoke during conditioning. This is normal, but make sure the kitchen is well ventilated.
1 Make sure you have removed any packaging and any cable ties used to secure the shelving during transit.
2 Make sure you have set the clock.
3 Make sure all the shelves are fitted.
UPPER
LOWER
NOITCNUF
NOITCNUF
ERUTAREPMET ERUTAREPMET
ERUTAREPMET ERUTAREPMET
5 Select the Bake function.
●
The halo will glow white.
●
Each function has a preset
temperature and so the oven
will start heating at the Bake
preset temperature of 360
o
F.
8 Select the Bake
function.
●
The halo will glow white.
●
Each function has a
preset temperature and
so the oven will start
heating at the Bake preset
temperature of 360
o
F.
4 Press the UPPER oven
selector button
●
The upper row of function
indicators will glow.
●
The halo around the
selector button will glow
red.
6 Set the temperature to 400
o
F for 30 minutes.
●
While the oven is heating up, the
temperature halo will glow red and the
temperature indicator will alternately show
the actual and set temperatures.
●
When the oven has reached set temperature,
a tone will sound and the halo will turn white.
9 Set the temperature to 400
o
F for 30 minutes.
●
While the oven is heating up, the
temperature halo will glow red and the
temperature indicator will alternately show
the actual and set temperatures.
●
When the oven has reached set temperature,
a tone will sound and the halo will turn white.
UPPER
LOWER
7 Press the LOWER oven function button
●
The lower row of function indicators
will glow
●
The Bake indicator on the top row will
continue to glow red, but the rest of
the indicators will go out.
US CA
AEROTECH
TM
OVEN
QUICK START GUIDE