Dimensions Guide

DATA SHEET
DATUM : BOTTOM OF CARCASS
DATUM : FRONT OF CARCASS
DATUM : FRONT OF CARCASS
N
B
O
D
M
P
C
IHGFE
27 1/8''
A
K
C
M
L
D
FRONT VIEW
PLAN VIEW
PROFILE VIEW
J
Model no:
OB30SDEPX3
Product Dimensions in
a Overall height* of oven
27 1/8''
B Overall width of oven
c Depth of oven front and control panel** (excludes handle and
dials)
d Depth of oven chassis (does not include oven front)
e Height from bottom datum to top of stainless fascia cap
f Height from bottom datum to bottom of stainless fascia cap
g Height from bottom datum to top of door
21 15/16''
h Height from bottom datum to top of handle
i Height from bottom datum to bottom of handle
j Height from bottom datum to top of stainless door cap
4 11/16''
k Height from bottom datum to top of vent
l Height of chassis
26 9/16''
M Depth of door (open) (measured from front of door)
20 7/8''
N Overall width of chassis
O Width of handle
28 5/8''
P Depth of handle (measured from front of door)
* All height measurements included mounted feet
** Measured to front glass surface and excludes
stainless cap
Minimum Clearances in
Height of cavity from bottom datum
Minimum inside width of cavity
28 1/2''
Minimum inside depth of cavity from front datum
22 5/8''
DATE: 11.06.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
INDICATES CABINETRY CARCASS DATUM
INDICATES MINIMUM CABINETRY CLEARANCES