Quick Start Guide

ManualsBrandsFisher Paykel ManualsDomestic AppliancesOB30SDEPX3N

Keep this document handy for easy reference.

●

For detailed information on the features of your oven, see your ‘User guide’.

●

Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.

●

For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service &

warranty’ booklet.

continued >

OB30SDEPX

OB30STEPX

1 Control panel

2 Oven vent louvres

3 Oven light

4 Telescopic sliding shelf (x3)

5 Side rack

6 Oven door and handle

7 Oven seal

Accessories:

8 Meat probe

9 Rack

!0 Grid

!1 Pan

Aero

Bake

True

Aero

Broil Classic

Bake

Aero

Broil

Aero

Pastry

Maxi

Broil

Locking the control panel

●

To lock, press and hold the

select button until the

control lock indicator comes

on.

●

To unlock, press and hold the

cancel button until the

indicator flashes and then

goes out.

Function indicators

(see ‘Oven functions’)

OB30SDEPX3 illustrated

Function dial

Temperature

indicator

Temperature

dial

Function halo

Temperature

halo

Control lock indicator (see

‘Locking the control panel’)

if lit:

Control panel is locked

Timer indicator

(see ‘Using the

timer’)

if lit:

Timer is

counting down

Close door indicator

if lit:

Door is open when oven is on

(some functions only). See

‘Troubleshooting’ in your User guide.

Cooking time indicator

(see ‘Automatic cooking’ in User guide)

if lit:

Automatic cooking time is set

Meat probe indicator

(see ‘Using the meat probe’ in User

guide)

if lit:

Meat probe is in use (display

will alternate between probe set

temperature and internal temperature

of the meat)

Stop time indicator

(see ‘Automatic cooking’ in User

guide)

if lit:

Automatic stop time is set

Display

Scroll Select Cancel

You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.

Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock

setting. If you want to set the clock later, follow the steps under ‘To change the time’.

To change the time

(within the user preference menu)

When the oven is first switched on at the wall

1 Press and hold the left and right

scroll

buttons together

for 3 seconds to enter the user

preference menu.

●

The display will either show 12 Hr

or 24 Hr

2 Press the select button to

confirm. The display will flash.

3 Follow steps 2-5 left to set the time.

●

At step 2a, you also now have the

ability to scroll between 24 Hr,

12 Hr and OFF (turns the display off).

●

Refer to the User guide to learn

more about this feature.

3 Press the left and right scroll

buttons to set the time.

1 The display will flash 24 Hr.

4 Press the select

button to

confirm.

2aPress the right scroll

button to

scroll between 24 Hrand 12 Hr

2bPress the select button to

confirm.

●

There will be a distinctive smell and a small amount of smoke during the conditioning of the oven.

This is normal, but make sure the kitchen is well ventilated during the conditioning.

●

Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly.

It is important to condition your oven before using it for cooking and baking. Conditioning will burn off any manufacturing residues

and ensure that you get the best results right from the start.

1 Make sure you have removed any packaging and any cable ties used to secure the shelving during transit.

2 Make sure you have set the clock.

3 Make sure all the shelves are fitted.

NOITCNUF

ERUTAREPMET

7 Set the temperature to 400

for 5 minutes.

●

The halo will remain white.

8 When you have finished, turn the function dial

to OFF . The halos will go out.

NOITCNUF NOITCNUF

Aero

Broil

ERUTAREPMET ERUTAREPMET

4 Select the Bake function.

●

The halo will glow white.

●

Each function has a preset

temperature and so the

oven will start heating at the

Bake preset temperature of

360

5 Set the temperature to 400

F for 30 minutes.

●

While the oven is heating up, the

temperature halo will glow red and the

temperature indicator will alternately show

the actual and set temperatures.

●

When the oven has reached set temperature,

a tone will sound and the halo will turn white.

6 After 30 minutes is up, select

the Aero Broil function.

US CA

AEROTECH

OVEN

QUICK START GUIDE

YOUR OVEN

THE CONTROL PANEL

SETTING THE CLOCK

CONDITION THE OVEN

Summary of content (2 pages)

PAGE 1
SETTING THE CLOCK QUICK START GUIDE AEROTECH TM OVEN US CA You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide. Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel button to exit the clock setting. If you want to set the clock later, follow the steps under ‘To change the time’. When the oven is first switched on at the wall Keep this document handy for easy reference.
PAGE 2
REPOSITIONING THE SHELVES USING THE TIMER You can use the timer at any time, even if you are not using the oven. If the time is more than an hour, the display will count down in minutes (hr:min). If it is less than an hour, it will count down in seconds (min:sec). You can set the timer for up to 23 hours 59 minutes. ● Placing the telescopic sliding shelves on the side racks provides EIGHT cooking positions to choose from. Refer to the User guide for suggested shelf positions.