Planning Guide - Minimal and Contemporary Triple Stack Install

DRAFT
INSTALLATION DETAILS - PLAN VIEW
0" Triple Stack
Oven, 0"
DETAIL D1 - COFFEE MAKER OR COOK PRODUCT with rebate
PLAN VIEW
DETAIL D2 - DRAWER
PLAN VIEW
DETAIL D - OVEN with rebate
PLAN VIEW
Front panel
1/16"
20mm
Side wall,
adjacent cabinet
Coffee Maker
or Cook Product
with Trim Kit
Side wall,
appliance cabinet
Front Panel
1/16"
20mm
Side wall,
adjacent cabinet
Screw
Installation washer
Side wall,
appliance cabinet
Front panel*
1/16"
20mm
Side wall,
adjacent cabinet
Drawer, 0"
Side wall,
appliance cabinet
762mm
0"
764mm
0 1/16"
MINIMUM
*NOTE: If the front
panel is thinner than
1/16" (20mm) a
rebate for the Drawer
is required to achieve
a flush finish.
1/16"
1.5mm
1/16"
20mm
1/8"
.5mm
1 5/8"
42mm
1/16"
2mm
1 5/8"
42mm
D
PLAN VIEW
Appliance cabinet width
RECOMMENDED*
Distance between adjacent front panels
*NOTE: Dimensions based on 1/16" (2mm) clearance
between Oven and adjacent front panels.
Product widths vary, consult detail views D1 and D2
for Coffee Maker or Cook Product with Trim Kit, and
Drawer clearances.
DATE: November 18, 2021
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com