Installation Instructions
14
!4INSTALLING THE ANTI-TIP BRACKET
=
=
Dotted line showing the position
of the range when installed
14 15/16”
(380mm)
3 Fix the stability bracket in place. It can be fixed as follows:
●
To the floor OR on the rear wall by 4 screws (supplied).
●
To the floor AND on the rear wall by 8 screws (supplied).
●
There are 8 x wood screws and 8 x screws with plastic
sleeve anchors supplied with the range in two separate
kits. Use the proper screws according to the type of
material on the floor and/or wall.
●
If using the the plastic sleeve anchors: drill 5/16” (8mm)
diameter holes and insert the supplied anchors before
attaching the stability bracket with the screws.
4 Slide the range into place, ensuring the bolt on the
adjustable bracket slots under the stability bracket.
●
Adjust the length of the bolt as necessary. Ensure the two
nuts are well tightened after any adjustments.
IMPORTANT!
●
Use the proper screws to fix the stability bracket in place
according to the type of material on the floor and/or wall.
●
Before drilling and holes or inserting any screws into the
floor or wall check that you will not damage any wiring or
pipes.
Stability bracket
Adjustable
bracket with
bolt correctly fitted
Stability bracket