User Guide

16
OVEN FUNCTIONS
IMPORTANT!
y Use all the functions with the oven door closed.
upper outer and lower elements
y Heat comes from both the upper and lower elements. The fan is not used in this
y function.
y Ideal for cakes and foods that require baking for a long time or at low temperatures.
y This function is not suitable for multi-shelf cooking.
Ideal for moist foods that take a longer time to cook eg rich fruit cake, or bread.
BAKE
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
TRUE AERO
fan and rear element
y By using the central rear heating element and fan, hot air is blown into the cavity,
providing a consistent temperature at all levels, making it perfect for multi-shelf cooking.
y Trays of cookies cooked on different shelves are crisp on the outside and chewy in the
middle.
y Meat and poultry are deliciously browned and sizzling while remaining juicy and tender.
y Casseroles are cooked to perfection and reheating is quick and efficient.
y When multi-shelf cooking it is important to leave a gap between trays (eg use shelves
3 & 5) to allow the air to move freely. This enables the browning of foods on the lower
tray.
y If converting a recipe from Bake to True Aero, we recommend that you decrease
thebake time or decrease the temperature by approximately 70°F / 20°C.
y For items with longer bake times (eg over an hour) it may be necessary to decrease
both time and temperature.
Ideal for multi-shelf cooking biscuits, cookies, scones, muffins and cupcakes.
TRUE AERO
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
TRUE AERO
GFX DIAL OR CON OVEN PYRO UL
1 KDM
19/06/17
Released for prototype only
LEP
1576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
GFX DIAL OR CON OVEN PYRO UL
1 KDM
19/06/17
Released for prototype only
LEP
1576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)