User Guide

17
OVEN FUNCTIONS
fan plus upper inner and outer elements
y This function uses the intense heat from the elements for top browning and the fan to
ensure even cooking of foods.
y Meat, poultry and vegetables cook beautifully; food is crisp and brown on the outside
while the inside remains moist and tender.
Ideal for whole chicken, tenderloin of beef or broiling your favourite chicken, fish or steak.
upper inner and outer elements
y Intense radiant heat is delivered from both top elements. You can use Maxi Broil on Low
OR High (100% power).
y For best results allow 5 minutes of preheat before placing food in the oven.
y The temperature halo will remain white while using the broil function.
y The most suitable function for ‘finishing off’ many meals, for example browning the top
of potato gratin and frittata.
Ideal for toasting bread or for top browning to ‘finish off dishes’.
fan plus upper outer and lower elements
y The oven fan circulates hot air from the top outer and the lower elements and
distributes it around the oven cavity.
y Food cooked tends to brown more quickly than foods cooked on the traditional Bake
function.
y You may need to decrease the time from that recommended in traditional recipes.
Ideal for single shelf baking that takes less than an hour to cook – foods such as muffins,
biscuits and cupcakes or things like enchiladas
AERO BAKE
MAXI BROIL
AERO BROIL
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
TRUE AERO
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
TRUE AERO
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
TRUE AERO
GFX DIAL OR CON OVEN PYRO UL
1 KDM
19/06/17
Released for prototype only
LEP
1576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
GFX DIAL OR CON OVEN PYRO UL
1 KDM
19/06/17
Released for prototype only
LEP
1576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
GFX DIAL OR CON OVEN PYRO UL
1 KDM
19/06/17
Released for prototype only
LEP
1576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)