User Guide
Table Of Contents
- Safety and warnings
- Introduction
- First use
- Cooking guide
- Oven functions
- Cooking Charts
- Setting the timer
- Auto cook
- Locking the oven controls
- User preference settings
- Sabbath mode
- Using your induction cooktop
- Locking the cooktop controls
- Using your cooktop’s special features
- Choosing the right cookware
- Cooking guidelines
- Using the warming drawer
- Care and cleaning
- Using the self clean function
- Troubleshooting
- Alert codes
- Warranty and service
73
ALERT CODES
If there is a problem with the oven, the range will:
y automatically suspend all oven functions
y beep five times
y display an alert code.
IMPORTANT!
Do not turn off the mains power supply to the range (wall switch) if you get an
alert code, unless the instructions in the chart following specifically instruct you
to. Thereare cooling fans within the range which are needed to cool the range
components. Turning off the power while the range is too hot may damage the range
and its surrounding cabinetry.
What to do if an alert code is displayed
1 If the beeping hasn’t stopped already, touch any control to stop it.
2 Make a note of the alert code displayed. You may need this information.
3 Check the chart following to see if you can fix the problem yourself and follow the
instructions.
4 If you can fix the problem and the alert code does not reappear, you can keep using
your oven.
OR
If you can’t fix the problem yourself or the alert code reappears and the problem
persists: wait until the cooling fans have stopped and the oven has completely cooled
down, then turn the power to the range off at the wall and call your Fisher & Paykel
trained and supported service technician or Customer Care with the alert code
information.