Installation Guide

18
18
2
CONVERSION TO LP/PROPANE GAS (OR CONVERSION
BACK TO THE ORIGINAL GAS - NATURAL GAS)
Every range is provided with a set of orifi ces for the various types of gas.
Select the orifi ces to be replaced according to the “ORIFICES TABLE”.
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the
body of each orifi ce.
CAUTION: Save the orifi ces removed from the appliance for future use.
SETTING THE PRESSURE REGULATOR
The pressure regulator is accessible by removing the storage drawer; the pressure
regulator is positioned on the rear right side of the range (fi g. 2.9).
To remove the storage drawer:
1. Open the drawer completely (fi g. 2.8).
2. Move down the lever of left guide (fi g. 2.8a) and up the lever of right guide (fi g.
2.8b).
3. Remove the drawer holding the levers in the same position (fi g. 2.8).
Fig. 2.8a
Fig. 2.8
Fig. 2.8b
WARNING:
• Do not remove drawer while
hot.
• Do not remove drawer while
the appliance is in opera-
tion.
• Be sure drawer is empty be-
fore removing.
• Always position your hand
below the front panel to
open/close the drawer.