Installation Guide

7
7
ASSEMBLING THE BACKGUARD
OR THE ISLAND TRIM
It is mandatory to install the
backguard or the island trim
• Assemble the backguard or the island trim
as shown in fi gure 1.3a or 1.3b and fi x it by
screwing the 3 screws “A” (which are already
fi xed on the back of the cooktop).
• Backguard only: do not remove the 3 spacers
“B” already fi tted on the back of the backguard.
1
GAS AND ELECTRIC CONNECTION
Fig. 1.2
Dotted line showing the position
of the range when installed
Area for
ELECTRICAL
connection
Area for
GAS connection
A
A
B
D
E
C
Ref. inch mm
A 2” 3/64 52
B 13” 3/16 335
C 10” 33/64 - 11” 9/64 (*) 267 - 283 (*)
D 18” 9/16 472
E 6” 17/32 - 7” 11/64 (*) 166 - 182 (*)
(*) : Depending on feet regulation
Fig. 1.3a
Fig. 1.3b
A
B
A