User Guide
Table Of Contents
- User Guide
- Contents
- Safety and warnings
- Introduction
- First use
- Cooking guide
- Oven functions
- Cooking charts
- Setting the timer
- Auto Cook
- Using the rotisserie
- Locking the oven controls
- User preference settings
- Sabbath Mode
- Using your gas cooktop
- Cooking guidelines and cookware
- Using the warming drawer
- Care and cleaning
- Using the Self Clean function
- Troubleshooting
- Alert codes
- Warranty and service
- Energy guidelines (GB IE only)
47
Burner Controls
The dials control the flow of gas through the valve.
Using the single burners
GRAPHICS LOCATION
1 Identify the dial of the burner you
want to use.
2 Starting from the O (OFF) position,
push the dial in and turn it
anticlockwise to HI.
z
The ignitor on the burner will spark.
3 After the burner has lit keep the
dial held in for a few more seconds
before releasing.
z
Releasing the dial too soon will
extinguish the flame.
GRAPHICS LOCATION
4 When the burner has lit, adjust the
flame anywhere between HI and LO.
z
Do not adjust the dial between
HI and O (OFF).
5 When you have finished cooking, turn
the clockwise back to O (OFF).
z
If you are using LP gas, there may be
a slight ‘extinction pop’ or flash at the
flame spreader a few seconds after
the burner has been turned off. This is
normal for LP gas.
USING YOUR GAS COOKTOP
Using the dual burner
6 Starting from the O (OFF) position,
push the dial in and turn it anti-
clockwise to either HI
GRAPHICS LOCATION
to light both
the inner and outer rings or HI
GRAPHICS LOCATION
to
light the inner ring only.
GRAPHICS LOCATION