User Guide
Table Of Contents
- User Guide
- Contents
- Safety and warnings
- Introduction
- First use
- Cooking guide
- Oven functions
- Cooking charts
- Setting the timer
- Auto Cook
- Using the rotisserie
- Locking the oven controls
- User preference settings
- Sabbath Mode
- Using your gas cooktop
- Cooking guidelines and cookware
- Using the warming drawer
- Care and cleaning
- Using the Self Clean function
- Troubleshooting
- Alert codes
- Warranty and service
- Energy guidelines (GB IE only)
48
USING YOUR GAS COOKTOP
If a burner does not light
Turn the control dial to O (OFF) and wait at least one minute before trying again, to all the
gas to disperse.
If the burner still does not light, check that:
z
the cooker is plugged in and the power supply is switched on
z
there is no power failure in your home or neighborhood
z
the gas is turned on
z
the gas bottle is not empty (if you use bottled gas)
z
the flame spreaders are clean and the holes are not clogged
z
the ignitors are sparking. If they are not sparking, they may be dirty or wet. Clean them
with a toothbrush and methylated spirits, as shown below.
See ‘Care and cleaning’ for instructions on removing and replacing the burner parts.
Cleaning the ignitor & probe
If the flame is irregular, check that the burner parts
(flame spreader and burner cap) are:
z
clean and dry
z
positioned correctly, as shown below.
z
For further advice, see sections ‘Care and cleaning’ and ‘Troubleshooting’.
Ignitor Flame spreader
Burner cap
Burner parts
Correct assembly of
burner parts
Incorrect assembly of
burner parts, resulting in
irregular flames
Probe
Ignitor