Installation Guide
Table Of Contents
- Safety and warnings
- General installation information
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the range
- Installing the anti-tip bracket
- Electrical connection
- Connection of the power supply cable
- Gas connection
- Flame testing
- Leak testing
- Gas conversion
- Adjusting the minimum burner settings
- Final checklist
8
A
B
D
E
C
f
A
B
D
E
C
Final position of cooker
against wall
Left side
of cavity
Floor
Gas
Electricity and Gas
C
E
D
B
AA
SUPPLY AREA DIMENSIONS
MM
A Distance from either edge of range to supply area 19
B Width of electrical area
860
C Width of gas only supply area 79
D Height of electrical supply area* 210 – 260
E Height of gas supply area* 700 – 750
F Depth of supply area (ie maximum protrusion of gas and
electrical connection from wall) 74
*Depending on adjustment of feet.
FITTING THE OPTIONAL BACKGUARD
Backguard (supplied with some models only)
z
Remove the screws and spacers on the rear of the cooktop.
z
Assemble the backguard as shown and fix onto the back of the range using the same
screws and spacers.
z
Fix the backguard onto the range using the screws provided.
LOCATION OF ELECTRICAL SUPPLY