Installation Guide

13
4 Fit the lock pin through the bracket as shown
5 Insert the drawer guides onto the sliding runners on either side of the range interior.
z
Ensure they are correctly lined up on both sides of the drawer.
6 Gently close the drawer completely. The safety catches will automatically lock into place.
2 Fit the lock pin through the bracket as shown.
3 Close the storage compartment door.
1 Open the storage compartment door.
To remove the storage/warming drawer
1 Open the storage/warming drawer completely.
2 Move down the lever of left guide A and up the lever of right guide B.
3 Remove the drawer holding the levers in the same position.
IMPORTANT
Do not remove storage/warming drawer while hot or during operation.
Be sure storage/warming drawer is empty before removing.
Always position your hand below the front panel to open/close the drawer.
Fitting the lock pin (models with a storage/warming drawer)
The anti-tip bracket is accessible by removing the storage/warmer drawer, and is
positioned on the rear right side of the range.
Fitting the lock pin (models with a storage compartment)
The anti-tip bracket is accessible by opening the storage compartment door, and is
positioned on the rear right side of the range.
A
B
INSTALLING THE ANTI-TIP BRACKET
bracket mounted
to rear wall
range
back
lock pin
bracket mounted
to rear wall
range
back
lock pin