Installation Guide
Table Of Contents
- Safety and warnings
- General installation information
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the range
- Installing the anti-tip bracket
- Electrical connection
- Connection of the power supply cable
- Gas connection
- Flame testing
- Leak testing
- Gas conversion
- Adjusting the minimum burner settings
- Final checklist
5
MODEL IDENTIFICATION
Model features may vary
OR90 MODELS
OR90SCG1
OR90SCG2
OR90SCG4
OR90SCG6
OR90SDG6
Unpacking and handling
z
Inspect the range to verify that there is no shipping damage. If any damage is detected, call the shipper and initiate a damage claim. Fisher & Paykel is not responsible for shipping damage.
z
DO NOT discard any packing material until the range has been inspected.
z
Remove the outer carton and any packing material from range. Some models are supplied with a protective film on steel and aluminum parts.
This film must be removed before installing or using the appliance.
PRIOR TO INSTALLATION