User Guide

17
OVEN FUNCTIONS
IMPORTANT!
z
Use all the functions with the oven door closed.
z
Safe food handling: leave food in the oven for as short a time as possible before and
after cooking or defrosting. This is to avoid contamination by organisms which may
cause food poisoning. Take particular care during warmer weather.
Upper outer and lower elements
z
Heat comes from both the upper and lower elements. The fan is not used in this function.
z
Ideal for cakes and foods that require baking for a long time or at low temperatures.
z
This function is not suitable for multi-shelf cooking.
Ideal for moist foods that take a longer time to cook eg rich fruit cake or bread.
Upper elements
z
This function delivers intense radiant heat from the upper elements.
z
You can set the intensity of the heat by altering the temperature setting.
z
For best results allow 5 minutes of preheat before placing food in the oven.
z
The most suitable function for ‘finishing off’ many meals, for example browning the top
of potato gratin and frittata.
z
Ensure you centre the dish under the inner grill element.
Ideal for toasting bread or for top browning to ‘finish off dishes’.
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
TRUE AERO
Grill
GFX DIAL OR CON OVEN PYRO UL
1 KDM
19/06/17
Released for prototype only
LEP
1576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
This is not a cooking function
z
Only the oven light comes on. It remains on in all the cooking functions.
GFX DIAL OR CL OVEN FUNC MECH
1 KDM
19/05/17
Released for prototype only
LEP
A KDM
26/10/17
LEP
A576585 1:1 1/1
1. REFER F&P DRAWING No. 578410 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics to be printed:
(PANTONE 423)
Graphics location:
4005570
Updated Pantone spec, updated FP
drawing ref, Released for pre production
Light
Bake
GFX DIAL OR CON OVEN PYRO UL
1 KDM
19/06/17
Released for prototype only
LEP
1576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
TRUE AERO