User Guide
Table Of Contents
- User Guide
- Contents
- Safety and warnings
- Introduction
- First use
- Cooking guide
- Oven functions
- Cooking charts
- Setting the timer
- Auto Cook
- Using your induction cooktop
- Using your cooktop’s special features
- Choosing the right cookware
- Cooking guidelines
- Using the storage compartment
- Care and cleaning
- Troubleshooting
- Alert codes
- Warranty and service
26
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
0 00
0 00
1 00
SETTING THE TIMER
z
You can use the timer at any time, even if you are not using the oven.
z
The time counts down in minutes (hours:min) until the last 5 minutes of cooking,
when it will countdown in seconds (min:sec).
z
You can set the timer for up to 23 hours and 59 minutes.
IMPORTANT!
The timer does NOT turn the oven off.
To set the timer
When the set time is up
z
The display will flash and a
tone will sound.
z
Press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
to stop the tone sounding.
1 Press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
.
2 Press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
until the time
is reset to 0
.
00
1 Press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
.
z
The clock will show 0
.
00 and the
timer indicator will flash.
2 Press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
and
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
to set the time.
z
The timer is now set and will begin
counting down.
z
The display will revert back to the
time of day and the timer indicator
will be solidly lit.
z
To check the time remaining
press
S1 OR90 CLAS GAS CP
1 KDM
4/05/17
Released for prototype only
LEP
2 KDM
8/06/17
Updated to include dash above hob
dials, repostioned FUNCTION and
TEMPERATURE
LEP
2576601 1:1 1/1
1. REFER F&P DRAWING No. XXXXX FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
GRAPHICS TO BE LASER MARKED
GRAPHICS LOCATION
MODEL/FINISH
OR90 Series 1 Stainless Steel LASERMARKED PANTONE 440
GRAPHICS TREATMENT / COLOUR
.
To cancel the timer