User Guide

51
CARE AND CLEANING
To replace the door glass after cleaning
When replacing the glass panes, make sure that:
z
You replace all parts correctly, as shown on the following page.
z
The inner pane must be in the position described below in order to fit into the door and
to ensure that the oven operates safely and correctly.
z
You take extra care not to bump the edges of the glass against any object or surface.
z
You do not force the glass into place. If you are experiencing difficulties replacing the
glass, remove it and start the process again from the beginning. If this still does not help,
call Customer Care.
1 Replace the inner pane of glass.
z
Ensure the angle cut corners are positioned at the bottom of the door.
z
Insert the the glass into the top set of grooves in the bracket at the top of the door.
z
Pull the pane slightly towards you.
z
Gently lower into place.
IMPORTANT!
z
Make sure the glass is facing the same way as when you removed it form the door.
z
You should be able to read the wording on it as it faces you.
1
2
3
Angle-cut corner
Angle-cut corner
PGW ECO