Installation Guide
Table Of Contents
- Safety and warnings
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the cooker
- Installing the anti-tip bracket
- Electrical connection
- Electrical feeder cable connection
- Final checklist
11
Fitting the adjustable feet
The adjustable feet must be fitted to the base of the cooker before use.
Rest the rear of the cooker on a piece of the polystyrene packaging exposing
the base for the fitting of the feet.
IMPORTANT
Take care not to damage the cooker during this operation.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
Fitting the adjustable feet covers (optional)
If using the adjustable feet covers fit these while the cooker is tipped over.
FITTING THE ADJUSTABLE FEET
3 Note: gently bend the edges of the
inner cover to adjust the tension
between the two parts if needed.
5 Stand cooker back upright. 6 Adjust the inner panels of the foot
covers to suit height of cooker feet.
4 Secure covers to brackets using the
provided screws.
2 Assemble the feet covers by slotting
the inner cover inside the outer cover.
1 Tip cooker onto its back and fix
brackets to mounting holes.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
3
2 Gently bend the sides of the inner
panels outwards to tension.
3 Slot the outer panels over the
tensioned inner panels.
6 Adjust the inner panels of the foot
covers to suit height of range feet.
INSTALLING FOOT COVERS (OR90 MODELS) SIMPLIFIED
1 Tip range onto its back and fix
brackets to mounting holes.
4 Secure covers to brackets using
the provided screws
5 Stand range back upright.
Levelling the cooker
z
The cooker may be levelled by screwing
the lower ends of the feet IN or OUT.
z
Small adjustments may be made to the
cooker in the upright position, however
it may be necessary to tip the cooker
again to make larger adjustments.
Fit the four legs by screwing them tight into the support base as shown.