Installation Guide

14
4 Fit the lock pin through the bracket as shown
5 Insert the drawer guides onto the sliding runners on either side of the cooker interior.
z
Ensure they are correctly lined up on both sides of the drawer.
6 Gently close the drawer completely. The safety catches will automatically lock into place.
2 Fit the lock pin through the bracket as shown.
3 Close the storage compartment door.
INSTALLING THE ANTI-TIP BRACKET
1 Open the storage compartment door.
To remove the storage/warming drawer
1 Open the storage/warming drawer completely.
2 Move down the lever of left guide A and up the lever of right guide B.
3 Remove the drawer holding the levers in the same position.
IMPORTANT
z
Do not remove storage/warming drawer while hot or during operation.
z
Be sure storage/warming drawer is empty before removing.
z
Always position your hand below the front panel to open/close the drawer.
A
B
Fitting the lock pin (models with a storage/warming drawer)
The anti-tip bracket is accessible by removing the storage/warmer drawer,
andispositionedon the rear right side of the cooker.
Fitting the lock pin (models with a storage compartment)
The anti-tip bracket is accessible by opening the storage compartment door,
andispositioned on the rear right side of the cooker.
bracket mounted
to rear wall
cooker
back
lock pin
bracket mounted
to rear wall
cooker
back
lock pin