Installation Guide
Table Of Contents
- Safety and warnings
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the cooker
- Installing the anti-tip bracket
- Electrical connection
- Electrical feeder cable connection
- Final checklist
16
ELECTRICAL FEEDER CABLE CONNECTION
IMPORTANT!
The power supply cable must be connected by a Fisher & Paykel trained and support
service technician or qualified person.
Feeder cable section
Use a type of cable according to the applicable local regulations.
SINGLE-PHASE CONNECTION
TWO-PHASE CONNECTION
THREE-PHASE CONNECTION
1 Remove the screws that hold the cover in
place at the back of the cooker.
3 Connect the live, neutral and earth cables
to the terminal. Lock the power supply
cable in place by screwing the terminal
end back to the strain relief. Re-mount the
screw cover back onto to the cooker.
IMPORTANT!
The earth conductor should remain
around 30mm longer than the others.
2 Unscrew the bottom terminal end of the
strain relief by using two spanners. Insert
terminal into the power suply cable, then
insert the feeder cable into the strain relief
(ensure sealing ring stays secured inside
the strain relief).
IMPORTANT!
Do not to unscrew the strain relief
from the cooker.
single-phase connection illustrated