Installation Guide
Table Of Contents
- Safety and warnings
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the cooker
- Installing the anti-tip bracket
- Electrical connection
- Electrical feeder cable connection
- Final checklist
6
MODEL IDENTIFICATION
Model features may vary.
OR90 Induction models
OR90SCI1
OR90SCI4
OR90SCI6
OR90SDI6
PRIOR TO INSTALLATION
Unpacking and handling
z
Inspect the cooker to verify that there is no shipping damage. If any damage is detected, call the shipper and initiate a damage claim. Fisher & Paykel is not responsible for shipping damage.
z
DO NOT discard any packing material until the cooker has been inspected.
z
Remove the outer carton and any packing material from cooker. Some models are supplied with a protective film on steel and aluminum parts.
This film must be removed before installing or using the appliance.
OR90SPI6X1