Installation Guide
Table Of Contents
- Safety and warnings
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the cooker
- Installing the anti-tip bracket
- Electrical connection
- Electrical feeder cable connection
- Final checklist
8
F
CLEARANCE DIMENSIONS
Note:
z
The cabinetry surrounding the cooker must be heat
resistant and capable of withstanding temperatures
of75°C above room temperature.
z
Do not install the cooker near flammable materials
suchas curtains.
z
Installing the cooker on a plinth: the cooker can be
installed on a plinth without the adjustable feet fitted.
z
Ensure the cooker is secure and provide safety
measures to keep it in place.
z
Cabinetry dimensions can be adjusted to suit the plinth
height, see product dimensions for chassis height.
z
The cooker must sit flush or above benchtop level.
ISOFRONT
B
D
C
A
E
B
Cooking surface
Electrical & Gas
(see diagrams following)
CLEARANCE DIMENSIONS
OR90
mm
A Minimum vertical distance between benchtop and cabinet extending above counter
450
B Minimum clearance from left and right edge of cooker to nearest vertical combustible surface
50
C Minimum clearance from cooking surface to:
z
Overhead cabinet centered above the cooktop
z
Ventilation hood centered above the cooktop
650
650
D Width of cabinetry opening
900
E Maximum height of cabinetry immediately adjacent to the cooker (from floor to countertop)*
946
F Maximum depth from wall to cabinetry face
600
*Depending on the height of the feet adjustment. The cooking surface must sit flush or above benchtop level.