Installation Guide
Table Of Contents
- Safety and warnings
- Parts supplied for installation
- Tools needed for installation (not supplied with the appliance)
- Model identification
- Prior to installation
- Product dimensions
- Clearance dimensions
- Fitting the optional backguard
- Location of electrical supply
- Ventilation requirements
- Fitting the adjustable feet
- Moving the cooker
- Installing the anti-tip bracket
- Electrical connection
- Electrical feeder cable connection
- Final checklist
9
FITTING THE OPTIONAL BACKGUARD LOCATION OF ELECTRICAL SUPPLY
Backguard (supplied with some models only)
z
Remove the screws and spacers on the rear of the cooktop.
z
Assemble the backguard as shown and fix onto the back of the cooker using
the same screws and spacers.
z
Fix the backguard onto the cooker using the screws provided.
A
B
D
E
C
Final position of cooker
against wall
Left side
of cavity
Floor
Electricity
B
A A
C
A
B
D
E
C
D
SUPPLY AREA DIMENSIONS MM
A Distance from either edge of Cooker to supply area 19
B Height of electrical supply area (from floor)*
210 – 260
C Width of electrical supply areas 859
D Depth of supply area
(ie maximum protrusion of electrical connection from wall)
74
*Depending on adjustment of feet.