Installation Guide

8|WARMING DRAWER INSTALLATION GUIDE
5DCABINETRY DIMENSIONS – WALL MOUNTED (STANDALONE)
4 3/4”
(120mm)
*PO
PLAN
SIDE
CABINETRY DIMENSIONS inches (mm)
M
Inside height of cavity
4 3/4” (120)
N
Inside width of cavity 22” (560)
O
Minimum inside depth of cavity 21 1/2” (545)
* PO – POWER OUTLET. Ensure there is an accessible earthed power outlet within 35 7/16” (900mm) of the centre rear of the product.
Additional 11/16” (18mm)
Wood spacer
IMPORTANT!
In a wall mounted installation,
there needs to be an
11/16” (18mm) Spacer fixed
underneath the warming
drawer first to raise it to
the required height.
Warming drawer
Supplied anti-tip bracket
(screwed to the back wall)
Fixed shelf
IMPORTANT!
In a standalone wall mounted installation, you
must ensure that the supplied anti-tip bracket
is installed unless there is a fixed shelf above
acting as an anti-tip obstacle.
Steam oven
Cabinet below
Cabinet above
Warming drawer
N
O
M