Installation Guide

8 | COFFEE MAKER INSTALLATION GUIDE
Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be
installed in a column and the column must be firmly fixed to the wall with commercially available brackets.
Lower Trim Kit
The Lower Trim kit shown is available to order separately from fisherpaykel.com.
To install the trim kit, refer to the instructions which accompany it.
IMPORTANT!
●
All installation or maintenance operations must be performed with the appliance disconnected
from the mains electricity supply.
●
Kitchen furniture in direct contact with the appliance must be heat resistant 149°F min (65°C min).
●
To guarantee correct ventilation, leave a gap at the bottom of the cabinet
(see measurements below).
6B CABINETRY DIMENSIONS (18 7/8" (480mm) CAVITY TRIM KIT)
TOPSIDE
Electrical supply
o
Lower
Trim kit
M
J
I
Lk
n
CABINETRY DIMENSIONS
EB24 MODELS
inches (mm)
I
Minimum inside width of cavity 22 1/16" (560)
J
Overall width of cabinetry 23 5/8" (600)
K
Minimum inside height of cavity 18 1/2" (470)
L
Overall height of cabinetry 18 7/8" (480)
M
Minimum inside depth of cavity 21 7/16" (545)
n
Ventilation air vent 2" (50)
o
Height of trim kit
13/16" (20)
PROUD INSTALL
FLUSH INSTALL
5/8–13/16"
(16–20mm)
min 1/16" (2mm)
5/8–13/16"
(16–20mm)
13/16"
(20mm)
13/16"
(20mm)