Planning Data Sheet

DATA SHEET
Steam Oven
DATE: 17.06.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM : BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
PROFILE VIEWFRONT VIEW
PLAN VIEW
DATUM : FRONT OF CHASSIS
VENTILATION
POWER OUTLET
LOCATION
Model no:
OS24NDB1, OS24NDBB1
(refer page 2 for metric measurements)
Product Dimensions
inches
a Overall height of oven
18 1/16"
B Overall width of oven
2 1/2"
c Overall depth of oven (excludes handle and front metal trim)
22 1/8"
d Depth of oven frame, control panel and door (excludes handle
and front metal trim)
7/ 8 "
E Depth of chassis (includes terminal block)
21 1/4"
F Height of chassis
17 9/16"
G Width of chassis
21 7/8"
H Height from bottom datum to top of oven door
1 5/8"
I Height of control panel
 15/16"
J Height of metal cap on control panel
1/16"
k Height from bottom datum to centreline of handle
12 /4"
l Width of handle
22 1/4"
m Depth of handle (measured from front of door)
1 5/8"
n Thickness of handle
5/8"
o Distance from bottom datum to bottom of door glass
/16"
p Depth of door (open) (measured from front of door)
12 5/8"
Minimum Clearances
inches
Minimum inside height of cavity
17 /4"
Minimum inside width of cavity
22 1/16"
Minimum inside depth of cavity
22 1/16"
Overall height of cabinetry (cavity around front frame)
18 1/8"
Overall width of cabinetry (cavity around front frame)
2 5/8"
Rear ventilation air vent depth*
2"
Rear ventilation air vent width*
22 1/16"
*A rear ventilation air vent totalling 4.4in is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
B
d
c
E
F
G
H
I
J
K
L
M
N
o
p
p
2 1/2"
18 1/16"
21 1/4"