Use and Care Guide

32
REPLACING THE OVEN LAMP
The oven lamp must have the following specifications.
●
Structure suitable for high temperatures up to 572°F (300°C).
●
Power supply: see the V/Hz value on the serial number plate.
●
Power 25W.
●
Type G9 connector.
IMPORTANT!
Ensure the appliance is off before replacing the
lamp to avoid the possibility of electric shock.
●
To protect the oven cavity, spread a tea towel
inside the oven.
●
Remove the screws holding the steel frame.
●
Remove the old lamp by sliding it out of its
socket and taking care not to break it.
●
Insert the new bulb taking care not to touch
it with your hands (we recommend using a
disposable latex glove when handling the bulb).
●
Replace the stainless steel frame taking care
not to pinch the silicone gasket seal.
●
Re-insert the screws that were previously removed.
●
Re-connect the oven to power.