User guide

3
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS!
Save these instructions for the local inspectors use.
To avoid hazard, follow these instructions carefully before installing or using
this appliance.
●
Make this information available to the person installing the appliance – doing so
could reduce your installation costs.
●
This oven is to be installed and connected to the electricity supply only by an
authorized person.
●
If the installation requires alterations to the domestic electrical system, call
a qualified electrician. The electrician should also check that the socket cable
section is suitable for the electricity drawn by the oven.
●
The oven must be grounded.
●
Installation must comply with your local building and electricity regulations.
●
This appliance must be installed and connected to the mains power supply only
by a suitably qualified person according to these installation instructions and
in compliance with any applicable local building and electricity regulations.
Failure to install the appliance correctly could invalidate any warranty or
liability claims.
●
If the power supply cable is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified person in order to avoid a hazard.
●
A circuit breaker is recommended.
●
Do not use adaptors, reducers or branching devices to connect the oven to
the mains electricity supply, as they can cause overheating and burning.
●
Make sure the cavity is completely sealed with no gaps. This is to ensure the
oven cooling system functions correctly.
●
The appliance must be installed and used in an ambient temperature between 41°F
and 95°F.