Installation Guide
Table Of Contents
- ActiveSmart-int-ref-install-guide-RB2470BRV-849695C-USCA
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
- ActiveSmart-int-ref-install-guide-RB2470BRV-849695C-FRCA
- 1 Consignes de sécurité et mises en garde
- 2 Liste des pièces
- 3 Liste des pièces — Panneaux de portes et poignées
- 4 Dimensions du produit
- 5 Dimensions des armoires
- 6 Rotation d’ouverture de la porte
- 7 Spécifications électriques
- 8 Avant l’installation
- 9 Déballage et déplacement de votre produit
- 10 Vue d’ensemble de l’installation
- 11 Changement de côté des charnières de porte (étape optionnelle)
- 12 Installation des clips de garniture
- 13 Installation des supports de fixation d’armoires
- 14 Installation des plaques d’ajustement de dégagement
- 15 Positionnement de votre produit dans les armoires
- 16 Fixation de votre produit dans les armoires
- 17 Installation des garnitures
- 18 Installation des panneaux de portes (en acier inoxydable)
- 19 Installation du panneau de porte supérieur (sur mesure)
- 20 Installation du panneau de porte inférieur (sur mesure)
- 21 Installation des couvercles et de la grille d’évent d’entrée d’air
- 22 Liste de vérification finale
8
8 BEFORE INSTALLATION
IMPORTANT!
Ensure your appliance is not exposed to any heat generating appliances eg cooktop, oven or dishwasher.
The appliance must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection.
All connections for electrical power and grounding must comply with local codes and ordinances and be made bylicensed personnel when required.
Avoid installation of the appliance/s under a ground fault circuit interrupter (GFCI).
Ensure the appliance is installed properly. Improperinstallation that results in appliance failure isnot covered under the appliance warranty.
Check the installation location
Cabinetry
Check the dimensions of the cabinetry (width, depth, height, floor level, finished alcove returns).
Ensure that the ventilation openings in the cabinetry areclear of obstruction.
Power supply connection
Ensure that there is a separate power outlet for the appliance.
Avoid sharing the power point with other appliances to prevent the appliance from accidentally switching off.
For power requirements, refer to the information onthe serial plate.
Ensure your appliance is properly grounded (earthed).
Connect your appliance to an electrical supply with thefitted plug and lead.
We recommend to use an isolating switch that is easily accessible to the user after the appliance is installed.
Your appliance
Ensure that your appliance is the correct model as peryour order.
Ensure that the packaging is not damaged upon delivery.
Check that the components and install kits are complete.