Installation Guide
Table Of Contents
- ActiveSmart-int-ref-install-guide-RB2470BRV-849695C-USCA
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
- ActiveSmart-int-ref-install-guide-RB2470BRV-849695C-FRCA
- 1 Consignes de sécurité et mises en garde
- 2 Liste des pièces
- 3 Liste des pièces — Panneaux de portes et poignées
- 4 Dimensions du produit
- 5 Dimensions des armoires
- 6 Rotation d’ouverture de la porte
- 7 Spécifications électriques
- 8 Avant l’installation
- 9 Déballage et déplacement de votre produit
- 10 Vue d’ensemble de l’installation
- 11 Changement de côté des charnières de porte (étape optionnelle)
- 12 Installation des clips de garniture
- 13 Installation des supports de fixation d’armoires
- 14 Installation des plaques d’ajustement de dégagement
- 15 Positionnement de votre produit dans les armoires
- 16 Fixation de votre produit dans les armoires
- 17 Installation des garnitures
- 18 Installation des panneaux de portes (en acier inoxydable)
- 19 Installation du panneau de porte supérieur (sur mesure)
- 20 Installation du panneau de porte inférieur (sur mesure)
- 21 Installation des couvercles et de la grille d’évent d’entrée d’air
- 22 Liste de vérification finale
9
9 UNPACKING AND MOVING YOUR APPLIANCE
WARNING!
Follow these instructions to avoid risks that can cause serious injury or death.
Keep doors closed until the appliance has been moved to its installation location.
IMPORTANT!
Be careful when unpacking to prevent damage to the surface of your appliance.
Ensure that the appliance is stable to prevent from tipping over when unpacking.
Do not open the doors to prevent the appliance from tipping over.
If the appliance is damaged, contact your Fisher & Paykel dealer.
Take note of your model and registration numbers located at the bottom right side of the
appliance. You will need these to request for servicing or repair of your appliance.
4 Remove the door gasket
baffles from both doors (A).
– Keep the door gasket
baffles in case you need
to move the appliance in
the future.
B
D
C
Top and side trims
Unpacking your appliance
1 Remove the carton and packaging,
along with the rip tag.
2 Remove the side trims taped to the
side of the appliance and the top trim
from inside theappliance.
3 Remove the bags of component parts
from inside the appliance.
Door gasket baffle
A
Moving your appliance
5 After unpacking, tape the door shut to prevent the possible opening of the doors when tilting.
6 Tilt the appliance slightly forward (B) and slide a two-wheeled cart (C) between the
appliance andbase pack (polystyrene foam).
– Do not insert the cart from the back or front side of the appliance!
7 Restrain the appliance to the cart with straps, and then tilt backward onto the cart (D).
8 Set aside the base pack and push the appliance to the installation location.
– Make sure the door stays closed until the appliance is positioned inside the cabinetry.