Installation Guide

11
!1 CHANGING OVER DOOR HINGE (OPTIONAL)
This model is right hinged with a left-opening door. If required, you can change this model to left hinged with a right-opening door.
1 Remove the covers on the left and right ends of the control panel using a
flat-head screwdriver.
4 Remove the door hinges (C) and refit to the opposite side (as illustrated above).
5 Insert the hinge covers (B).
6 Insert the hinge hole plugs to the holes on the opposite side (A).
2 When changing the hinge position
remove the hinge hole plugs (A).
RIght hinged door Left hinged door
C
3 Remove the remaining hinge covers (B).
Remove the left hand
cover by levering from
the outer edge.
Remove the right hand cover by
levering from the outer edge.
Remove the hinge cover by
levering from the inner edge.
A
Right hand cover
Hinge cover
Left hand cover
B