Installation Guide

15
!5 POSITION YOUR APPLIANCE INSIDE THE CABINETRY
Aligning the appliance inside the cabinetry
3 Push the appliance all the way into the cabinetry and adjust its position.
– Ensure the front edges of all clearance adjustment plates (refrigerator and freezer
doors) are flush with the cabinetry front edge (B).
B
A
Connecting the appliance to the power supply
1 Move the appliance in front of the cabinetry close enough that you can access behind to
connect the power supply.
2 Connect the power cord of the appliance to the power outlet (A) and turn ON before
placing into the cabinetry.
– Ensure that the power cord does not bend or get entangled to prevent damage
that can cause a fire hazard.
4 Ensure the front tab of the position adjustment plate is up against the cabinetry front
edge (D).
Note: If not using clearance adjustment plates, ensure the
front face of each door hinge is flush with the cabinetry
front edge (C).
C
D