Installation Guide

Table Of Contents

!9 INSTALL TOP DOOR PANEL (CUSTOM)

Height adjustment of the door panel

!3 Turn the height adjustment nuts (H) with a hexkey.

– We recommend to use a T-handle hex key so that the height adjustment nuts can be

turned easily without being blocked by the magnet sensor.

– If the height adjustment nuts cannot be adjusted, check the left and right clearances

ofthe top hanging bracket.

Side adjustment of the door panel

!4 Move the door panel slightly sideways to adjust

the side alignment.

!5 Screw the side adjustment nuts (I) onto the

thread of the height adjustment nuts to secure

the door panel to the refrigerator door.

Depth adjustment of the door panel

!6 Loosen the depth adjustment nuts (J) and move

the door panel forward/backward to adjust the

depth position.

!7 Tighten the nuts fully after you are satisfied with

the adjustments.

Adjusting the door panel

Fixing the top door panel

!8 Once you are satisfied with

the adjustment, fully tighten

the screws of the bottom

attachment brackets (K) to

secure the door panel.

!9 Place the bracket covers

on the bottom attachment

brackets (L).

Hanging the door panel

!0 Open the refrigerator door.

!1 Hang the top door panel onto the height

adjustment nuts (E) at the top of the

refrigerator door.

Bottom view of door

!2 Align the bottom attachment

brackets (F) with the screw

holes at the bottom of the

top door panel. Fasten with

cabinetry attachment screws

(G) and wood screws (H).

– Do not tighten fully to

allow adjustment of the

top door panel.

SCALE 2:1