Installation Guide

24
@0 INSTALL BOTTOM DOOR PANEL (CUSTOM)
Removing the hanging brackets
Freezer door
2 Pull out the rulers from the
internal slots of the top hanging
bracket and turn the rulers
around.
3 Insert the rulers into the external
slots of the top hanging bracket
with the overhang of the rulers
pointing outward.
External slots
Internal slots
5 Open the freezer door. Remove the
two side adjustment nuts (B) on the
top hanging bracket using a spanner,
then remove the top hanging bracket
and rulers together.
– Ensure the rulers are kept
in place as you remove the
hanging bracket.
Top hanging
bracket
Freezer door
B
A
Top door panel
1/8” (3mm) gap
Side view
4 Push the rulers down and close
the freezer door. Adjust the
rulers so that the top side of the
overhang of each ruler contacts
the bottom of the top door
panel. (A).
1 Open the freezer door and remove the
top hanging bracket cover by drawing out
upwards.
SCALE 2:1