Installation Guide
Table Of Contents
- ActiveSmart-int-ref-install-guide-RB2470BRV-849695C-USCA
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
- ActiveSmart-int-ref-install-guide-RB2470BRV-849695C-FRCA
- 1 Consignes de sécurité et mises en garde
- 2 Liste des pièces
- 3 Liste des pièces — Panneaux de portes et poignées
- 4 Dimensions du produit
- 5 Dimensions des armoires
- 6 Rotation d’ouverture de la porte
- 7 Spécifications électriques
- 8 Avant l’installation
- 9 Déballage et déplacement de votre produit
- 10 Vue d’ensemble de l’installation
- 11 Changement de côté des charnières de porte (étape optionnelle)
- 12 Installation des clips de garniture
- 13 Installation des supports de fixation d’armoires
- 14 Installation des plaques d’ajustement de dégagement
- 15 Positionnement de votre produit dans les armoires
- 16 Fixation de votre produit dans les armoires
- 17 Installation des garnitures
- 18 Installation des panneaux de portes (en acier inoxydable)
- 19 Installation du panneau de porte supérieur (sur mesure)
- 20 Installation du panneau de porte inférieur (sur mesure)
- 21 Installation des couvercles et de la grille d’évent d’entrée d’air
- 22 Liste de vérification finale
28
@2 FINAL CHECKLIST
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer’s Name
Installer’s Signature
Installation Company
Installation Date
TO BE COMPLETED BY THE INSTALLER
All models
Check all parts are installed.
Ensure the appliance is level.
Ensure the appliance is securely fastened to the cabinetry with the supplied fittings.
Ensure the doors can open and close freely with no resistance from surrounding cabinetry.
Ensure all internal and external packaging is removed from the appliance before use.
FISHERPAYKEL.COM
© Fisher & Paykel Appliances 2018. All rights reserved.
The appliance specifications in this booklet apply to the specific
appliances and models described at the date of issue. Under our policy
of continuous appliance improvement, these specifications may change
at any time. You should therefore check with your Dealer to ensure this
booklet correctly describes the appliance currently available.