User Guide
Table Of Contents
- Introduction
- Consignes de sécurité et mises en garde
- Caractéristiques de rangement
- Fonctions spéciales
- Instructions d’utilisation
- Nettoyage et entretien
- Conservation des aliments
- Dépannage
- Service et garantie
- Introduction
- Safety and warnings
- Storage features
- Special features
- Operating instructions
- Cleaning care and maintenance
- Food care
- Troubleshooting
- Service & Warranty
9
SPECIAL FEATURES
Setting a special function
Fast Freeze
This function helps you get the best possible
results when freezing fresh food. ‘Fast Freeze’
boosts the freezing speed by dropping the
freezer compartment to a colder temperature for
a preset time to ensure freshness, texture and
taste are retained during the freezing process.
To activate and deactivate ‘Fast Freeze’:
To activate the ‘Fast Freeze’ press ‘Menu’ once. The icon will start to flash.
After5seconds the icon will stop flashing and remain illuminated indicating that
‘Fast Freeze’ has been activated.
‘Fast Freeze’ will automatically deactivate. However if you wish to manually deactivate
‘Fast Freeze’ press ‘Menu’ once. The icon will flash then turn off and the freezer
compartment will return to its previously set temperature.
IMPORTANT!
For best results we recommend that you activate this function before it is required.
Max Cool
Having the refrigerator door open for long periods
of time or loading the refrigerator full of warm food
(eg after a trip to the supermarket) will raise
the temperature of the compartment. ‘MaxCool’
boosts the cooling power by dropping the
refrigerator to a colder temperature for a preset
time, thereby ensuring vital nutrients, freshness,
texture and taste are retained.
To activate and deactivate ‘Max Cool’:
To activate ‘Max Cool’ press ‘Menu’ twice. The icon will start to flash. After 5seconds
the icon will stop flashing and remain illuminated indicating that ‘MaxCool’ has been
activated.
‘Max Cool’ will automatically deactivate. However if you wish to manually deactivate
‘Max Cool’ press ‘Menu’ twice. The icon will flash then turn off and the refrigerator
compartment will return to its previously set temperature.
IMPORTANT!
For best results we recommend that you activate this function approximately 2 hours
before it is required. Alternatively activate this function when placing a load of fresh
food into the refrigerator compartment.
EN