Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
14
!4 INSTALL CLEARANCE ADJUSTMENT PLATES
IMPORTANT!
Clearance adjustment plates are installed depending on the overall
dimensions of your cabinetry (see table for more information).
1 Attach clearance adjustment plates to the door hinges of the
refrigerator and freezer doors.
– Ensure the correct orientation when attaching the plates.
CABINETRY OUTSIDE WIDTH OF CABINETRY
in (mm)
INSIDE WIDTH OF CABINETRY
in (mm)
THICKNESS OF SIDE PANEL
in (mm)
CLEARANCE ADJUSTMENT PLATE
Standard US 24” (609) 221/2” (571.5) 3/4” (19)
Standard European 235/8” (600) 221/4” (564) 11/16” (18)
*
221/2” (570) 5/8” (15)
* The clearance adjustment plate is not necessary if the outside width of your cabinetry is 235/8” (600mm) with 221/4” (564mm) inside dimension and 11/16” (18mm) side panels.
Clearance adjustment plate