Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
16
!6 FIX YOUR APPLIANCE INSIDE THE CABINETRY
2 Slide the cabinetry attachment bracket
towards the cabinetry wall so that the position
adjustment plate is pressed against the cabinetry
wall, and then fix with a wood screw (A).
3 Tighten the attachment bracket screws (B).
1 Fix the appliance to the cabinetry by
screwing in all door hinges.
5 Place the bracket cover on the cabinetry
attachment bracket (D).
A
B
Break off
C
D
4 Once the appliance is fixed into the
cabinetry, break off the tab of the position
adjustment plate (C).