Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
2222
!9 INSTALL TOP DOOR PANEL (CUSTOM)
Installing the hanging and attachment brackets
7 Align the center line of the top hanging bracket with the center of the top door panel.
8 Once aligned, fix the top hanging bracket to the top door panel with wood screws.
9 Remove the rulers from the top hanging bracket and discard.
D
6 Lay the top custom door panel (face down) onto the floor and place the top hanging
bracket on the door panel. Latch the rulers on top of the door panel (D).