Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
24
@0 INSTALL BOTTOM DOOR PANEL (CUSTOM)
Removing the hanging brackets
Freezer door
2 Pull out the rulers from the
internal slots of the top hanging
bracket and turn the rulers
around.
3 Insert the rulers into the external
slots of the top hanging bracket
with the overhang of the rulers
pointing outward.
External slots
Internal slots
5 Open the freezer door. Remove the
two side adjustment nuts (B) on the
top hanging bracket using a spanner,
then remove the top hanging bracket
and rulers together.
– Ensure the rulers are kept
in place as you remove the
hanging bracket.
Top hanging
bracket
Freezer door
B
A
Top door panel
1/8” (3mm) gap
Side view
4 Push the rulers down and close
the freezer door. Adjust the
rulers so that the top side of the
overhang of each ruler contacts
the bottom of the top door
panel. (A).
1 Open the freezer door and remove the
top hanging bracket cover by drawing out
upwards.
SCALE 2:1