Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
26
@0 INSTALL BOTTOM DOOR PANEL (CUSTOM)
Fixing the bottom door panel
!8 Once you are satisfied with
the adjustment, fully tighten
the screws of the bottom
attachment brackets (K) to
secure the door panel.
Adjusting the door panel
J
H
I
Height adjustment of the door panel
!3 Turn the height adjustment nuts (H) with a hexkey. Hold the side adjustment nuts (J) with
a spannerwrench to ensure it does not rotate when turning the height adjustment nuts.
– If the height adjustment nuts cannot be adjusted, check the left and right clearances
ofthe bottom hanging bracket.
Side adjustment of the door panel
!4 Move the door panel slightly sideways to adjust the side alignment.
!5 Screw the side adjustment nuts (I) onto the thread of the height adjustment nuts to secure
the door panel to the refrigerator door.
Depth adjustment of the door panel
!6 Loosen the depth adjustment nuts (J) and move the door panel forward/backward to
adjust the depth position.
!7 Tighten the nuts fully after you are satisfied with the adjustments.
SCALE 2:1
!9 Place the bracket covers
on the bottom attachment
brackets (L).
L
K