Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
3
2 COMPONENTS LIST
Fasteners — included in the appliance.
#8 x 5/8
Pan Head
Philips Screw
#8 x 5/8
Pan Head
Philips Screw
Cabinetry attachment
screws (2)
Hinge screws (8) Bottom attachment
screws (4)
#8 x 19
Countersunk
Twin Thread
Posi Screw
#8 x 19
Countersunk
Twin Thread
Posi Screw
Wood screws (52) Hinge hole plugs (8)
Trim installation fittings — included in the appliance.
Trim end LH (2) Trim end RH (2) Top trim clips (2) Side trim clips (8)
Top corner hinged
LH (1)
Top corner hinged
RH (1)
Top corner
non hinged RH (1)
Top corner
nonhinged LH (1)
Pre-installed parts — included with the appliance.
Top hanging
bracket (2x)
Top hanging
bracket cover (2x)
Top attachment
ruler (4x)
Hinge covers (4) Door gasket baffle* (2x)
* Used only when transporting the appliance. Remove from the door after delivery of the appliance.
Door panel (Custom) fittings — included in the appliance.
Bottom attachment
brackets (4)
Appliance fittings — included in the appliance.
Position adjustment
plate(1)
Clearance adjustment
plates (4)
Cabinetry attachment
bracket(1)
Cabinetry attachment
bracket cover (1)
Bottom attachment
bracket covers (4)