Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
6
6 DOOR OPENING ROTATION
DOOR OPENING AND CLEARANCE DIMENSIONS in (mm)
A
Width of door (90° open) measured from front of door panel 24” (610)
b
Minimum door clearance* to adjacent wall (115° ) 13 3/4” (350)
c
Minimum door clearance* to adjacent wall (90° ) 4” (100)
* Measured from front cabinetry edge.
WARNING!
Ensure that the appliance is stable before opening the doors.
Ensure that you follow the instructions to avoid risks that can cause serious injury or death.
A
115° DOOR OPENING
(FULL ROTATION)
90° DOOR OPENING
Wall Wall
C
B
A