Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Components list
- 3 Components list — Door panels and handles
- 4 Product dimensions
- 5 Cabinetry dimensions
- 6 Door opening rotation
- 7 Electrical specifications
- 8 Before installation
- 9 Unpacking and moving your product
- 10 Installation overview
- 11 Changing over door hinge (optional)
- 12 Install trim clips
- 13 Install cabinetry attachment brackets
- 14 Install clearance adjustment plates
- 15 Position your product inside the cabinetry
- 16 Fix your product inside the cabinetry
- 17 Install the trims
- 18 Install door panels (stainless steel)
- 19 Install top door panel (custom)
- 20 Install bottom door panel (custom)
- 21 Install covers and inlet vent grille
- 22 Final checklist
7
7 ELECTRICAL SPECIFICATIONS
WARNING!
Electric shock hazard! Assume all parts are live.
Disconnect supply before servicing and installation.
!
!
Floor
REAR OF CAVITY
Left side
of cavity
77/8”
(200mm)
!
!
Electrical
Electrical
Alternative area for electrical connection
should be on the wall above the cabinetry.
ELECTRICAL SPECIFICATIONS
Supply 120 VAC, 60Hz
Service 10 amp circuit
Outlet 3-prong grounding plug [NEMA 5 – 15P]
Note: Electrical connection can be located in an adjacent cabinet to either side of the fridge or above the fridge cavity.
We recommend to use an isolating switch that is easily accessible to the user after the refrigerator is installed.
Do not locate electricity in this area, keep clear of connections.
CAUTION: central area can only fit water outlet and electrical plug if they are placed within a recessed cavity.
!
!
Power cord (excl. plug) — 41 3/8” (1050mm)
from top edge of appliance
Power cord (excl. plug) — 931/4” (2370mm)
from left side edge of appliance
LEFT HAND SIDE
Power cord (excl. plug) — 105 1/8” (2670mm)
from right side edge of appliance
RIGHT HAND SIDE