Installation Guide

!5 POSITION YOUR APPLIANCE INSIDE THE CABINETRY

Aligning the appliance inside the cabinetry

3 Push the appliance all the way into the cabinetry and adjust its position.

– Ensure the front edges of all clearance adjustment plates (refrigerator and freezer

doors) are flush with the cabinetry front edge (B).

Connecting the appliance to the power supply

1 Move the appliance in front of the cabinetry close enough that you can access behind to

connect the power supply.

2 Connect the power cord of the appliance to the power outlet (A) and turn ON before

placing into the cabinetry.

– Ensure that the power cord does not bend or get entangled to prevent damage

that can cause a fire hazard.

4 Ensure the front tab of the position adjustment plate is up against the cabinetry front

edge (D).

Note: If not using clearance adjustment plates, ensure the

front face of each door hinge is flush with the cabinetry

front edge (C).