Manualshelf

Installation Guide

ManualsBrandsFisher & Paykel ManualsAll RefrigeratorsFisher & Paykel - Series 7 8 Cu. Ft. Bottom-Freezer Counter-Depth Refrigerator - Custom Panel Ready
11121314151617181920
18
!8 INSTALL DOOR PANELS (STAINLESS STEEL)
IMPORTANT!
Ensure to protect the finish of the Fisher & Paykel Stainless steel door panels.
Leave the protective film on the panels when hanging and remove the film only when the installation is complete.
Removing the hanging bracket
1 Open the refrigerator door and remove the top hanging bracket cover by drawing out
upwards.
Refrigerator door
Repeat steps 1 – 2 for the freezer door.
2 Remove the two side adjustment nuts (A) on the top hanging bracket using a spanner,
then remove the top hanging bracket and rulers together.
– Keep the hanging bracket to reinstalllater.
Refrigerator door
Top hanging
bracket
A